{"product_id":"5-24v-touch-sensor-switch-dimmable-cabinet-light-module","title":"5-24V Penetrating Touch Sensor Switch – 4-Mode Dimmable LED Module","description":"\n\u003ch2\u003eIKSLED 5-24V Penetrating Touch Sensor Switch — Dimmable DIY Cabinet Light Control\u003c\/h2\u003e\n\u003cp\u003eTake full control of your cabinet, closet, or furniture lighting without drilling holes or exposing hardware. The IKSLED Partition Touch Sensor Switch mounts discreetly behind panels of wood, acrylic, plastic, or clear glass up to 5 cm thick, and responds to a simple touch or hand-sweep gesture right through the surface. No exposed contacts, no complicated wiring — just clean, intuitive lighting control for any DC 5–24 V LED setup.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e⚠️ Important:\u003c\/strong\u003e Please secure the sensor firmly in place \u003cem\u003ebefore\u003c\/em\u003e turning on the power.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePenetrating Capacitive Sensing\u003c\/strong\u003e — Works through up to 5 cm of wood, plastic, acrylic, or transparent glass. (Note: mirrored or metallic-coated glass is not supported.)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand-Sweep Gesture Detection\u003c\/strong\u003e — Wave your hand within 1–2 cm of the surface to trigger the switch without physical contact.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4 Selectable Functional Modes\u003c\/strong\u003e for maximum versatility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltra-Low Standby Draw\u003c\/strong\u003e — Only ~100 µA at rest, keeping energy use minimal.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Voltage Compatibility\u003c\/strong\u003e — DC 5 V to 24 V constant-voltage systems (input = output).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact 32 × 32 mm Form Factor\u003c\/strong\u003e — Fits neatly inside cabinets, desks, and custom furniture builds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1-Year Warranty\u003c\/strong\u003e | Certifications: CCC, CE\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e4 Functional Modes\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTouch On\/Off + Hold for Continuous Stepless Dimming\u003c\/strong\u003e (with brightness memory — restores your last brightness level on next power-on)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTouch On\/Off Only\u003c\/strong\u003e — Simple toggle with no dimming\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTouch to Turn On, Release to Turn Off\u003c\/strong\u003e — Momentary\/hold-to-illuminate mode\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-Stage Dimming\u003c\/strong\u003e — Cycle through Low \/ Medium \/ High brightness levels\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 5–24 V (constant voltage only)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Load Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Load Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 V: \u0026lt;12 W | 12 V: \u0026lt;48 W | 24 V: \u0026lt;60 W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandby Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~100 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensing Range (hand-sweep)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Partition Thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≤ 5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWood, plastic, acrylic, transparent glass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 × 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlastic housing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCCC, CE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in Mainland China\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCustomizable Options Available\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDelayed shut-off timing\u003c\/li\u003e\n  \u003cli\u003eOutput signal adjustment\u003c\/li\u003e\n  \u003cli\u003eWire specifications (contact seller for custom orders)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\u003cp\u003eThis module is designed exclusively for \u003cstrong\u003econstant-voltage\u003c\/strong\u003e LED lighting systems. It is \u003cstrong\u003enot compatible\u003c\/strong\u003e with constant-current LED drivers or devices. Always verify your power supply type before installation.\u003c\/p\u003e\n\n\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eKitchen cabinet and pantry lighting\u003c\/li\u003e\n  \u003cli\u003eWardrobe and closet LED strips\u003c\/li\u003e\n  \u003cli\u003eDesk and office furniture accent lighting\u003c\/li\u003e\n  \u003cli\u003eDisplay case and retail shelving lighting\u003c\/li\u003e\n  \u003cli\u003eDIY smart-home lighting projects\u003c\/li\u003e\n  \u003cli\u003eUnder-shelf and bookcase illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLearn more: \u003ca href=\"https:\/\/www.osha.gov\/eye-face-protection\" target=\"_blank\" rel=\"noopener\"\u003eOSHA on eye and face protection\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: What surfaces can the touch sensor switch work through?\u003c\/h4\u003e\n\u003cp\u003eA: The IKSLED penetrating touch sensor switch is designed to work through non-conductive surfaces up to 5 cm thick, including wood, plastic, acrylic, and transparent glass. It does not work through mirrored or metallic-coated glass due to signal interference.\u003c\/p\u003e\n\n\u003ch4\u003eQ: What is the difference between touch mode and hand-sweep mode?\u003c\/h4\u003e\n\u003cp\u003eA: Touch mode activates when you place your finger directly on the surface above the sensor. Hand-sweep mode detects a gesture when your hand passes within approximately 1–2 cm of the surface, allowing you to trigger the switch without contact — ideal for when your hands are full or wet.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Can I use this switch with any LED driver?\u003c\/h4\u003e\n\u003cp\u003eA: This module is compatible only with \u003cstrong\u003econstant-voltage\u003c\/strong\u003e DC LED drivers (5 V, 12 V, or 24 V). It must not be used with constant-current LED drivers, as this can damage the module or the connected lighting.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Does the switch remember the brightness level after power is cut?\u003c\/h4\u003e\n\u003cp\u003eA: Yes — when operating in Mode 1 (Touch On\/Off + Hold for Stepless Dimming), the switch features brightness memory. It will restore the last-used brightness level the next time the light is turned on.\u003c\/p\u003e\n\n\u003ch4\u003eQ: How do I choose between the 4 functional modes?\u003c\/h4\u003e\n\u003cp\u003eA: The functional mode is selected during installation\/setup. The module ships with a default mode, and modes can be changed by following the configuration procedure described in the included instructions. Custom factory-set modes are also available on request.\u003c\/p\u003e\n\u003c!-- production-packaging-notice --\u003e\n\u003ch3\u003eProduction \u0026amp; Packaging Notice\u003c\/h3\u003e\n\u003cp\u003eTo maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What surfaces can the touch sensor switch work through?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The IKSLED penetrating touch sensor switch is designed to work through non-conductive surfaces up to 5 cm thick, including wood, plastic, acrylic, and transparent glass. It does not work through mirrored or metallic-coated glass due to signal interference.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between touch mode and hand-sweep mode?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Touch mode activates when you place your finger directly on the surface above the sensor. Hand-sweep mode detects a gesture when your hand passes within approximately 1–2 cm of the surface, allowing you to trigger the switch without contact — ideal for when your hands are full or wet.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use this switch with any LED driver?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This module is compatible only with constant-voltage DC LED drivers (5 V, 12 V, or 24 V). It must not be used with constant-current LED drivers, as this can damage the module or the connected lighting.\"}}, {\"@type\": \"Question\", \"name\": \"Does the switch remember the brightness level after power is cut?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — when operating in Mode 1 (Touch On\/Off + Hold for Stepless Dimming), the switch features brightness memory. It will restore the last-used brightness level the next time the light is turned on.\"}}, {\"@type\": \"Question\", \"name\": \"How do I choose between the 4 functional modes?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The functional mode is selected during installation\/setup. The module ships with a default mode, and modes can be changed by following the configuration procedure described in the included instructions. Custom factory-set modes are also available on request.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/0dwbi8-fa.myshopify.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Home page\", \"item\": \"https:\/\/0dwbi8-fa.myshopify.com\/collections\/frontpage\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"5-24V Penetrating Touch Sensor Switch – 4-Mode Dimmable LED Module\", \"item\": \"https:\/\/0dwbi8-fa.myshopify.com\/products\/5-24v-touch-sensor-switch-dimmable-cabinet-light-module\"}]}\u003c\/script\u003e","brand":"Quake","offers":[{"title":"stepless dimming","offer_id":50286562869475,"sku":"14:350852#stepless dimming","price":13.55,"currency_code":"USD","in_stock":true},{"title":"No dimming","offer_id":50286562902243,"sku":"14:29#No dimming","price":15.65,"currency_code":"USD","in_stock":true},{"title":"3-Level Dimming","offer_id":50286562935011,"sku":"14:200004889#3-Level Dimming","price":15.54,"currency_code":"USD","in_stock":true},{"title":"TOUCH ON release OFF","offer_id":50286562967779,"sku":"14:366#TOUCH ON release OFF","price":16.31,"currency_code":"USD","in_stock":true},{"title":"No dimming 1","offer_id":50286563000547,"sku":"14:1052#No dimming","price":14.63,"currency_code":"USD","in_stock":true},{"title":"3-Level Dimming 1","offer_id":50286563033315,"sku":"14:496#3-Level Dimming","price":14.7,"currency_code":"USD","in_stock":true},{"title":"TOUCH ON release OFF 1","offer_id":50286563066083,"sku":"14:350853#TOUCH ON release OFF","price":14.67,"currency_code":"USD","in_stock":true},{"title":"stepless dimming 1","offer_id":50286563098851,"sku":"14:10#stepless dimming","price":15.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/9439\/1523\/files\/S693fd18ecc8f4fc3b7784aea30812d84l.webp?v=1790289798","url":"https:\/\/quakegoods.com\/products\/5-24v-touch-sensor-switch-dimmable-cabinet-light-module","provider":"Quake","version":"1.0","type":"link"}